Remove the accessories from the main packaging. You should find the following: Removable handle Telescopic Crevice Tool Dusting Brush Pet Hair Remover Turbo Nozzle Allergen Remover Turbo Nozzle (certain models only) Allergy Defender Granules

Fitting extension tube

Fit turbo nozzle ontop of the dust box

Fit hose into handle

Fit handle onto cleaner

Connect the handle to the top of the machine by pressing down firmly until it clicks into place.

Connect the stretch hose to the handle by plugging the hose cuff into the back of the handle until it clicks in place.

Secure the telescopic crevice tool onto the rear of the cleaner as the illustration.

Secure the dusting brush onto the dusting brush post as per the illustration.

Secure the pet hair turbo brush onto the separator lid. Push until it clicks into place, as per the illustration.

Unlock the cleaner by pressing the upright lock pedal at the rear of the cleaner with your foot, as per the illustration. After use return the cleaner to the upright lock position. You will hear an audible click once locked in place.

To switch the cleaner on or off, press the foot pedal on the right of the cleaner.

To start the brushbar rotation press the foot pedal on the left of the cleaner. To stop the brushbar rotation press the foot pedal again.START - Ideal carpet cleaning.STOP - Ideal hard floor cleaning. The brushbar rotation automatically stops when the cleaner is put into the upright position.

Turn the cleaner off and remove the plug. Wind the cord around the cord storage hooks. Rotate the storage hooks to quickly release the full length of the power cord.

The cleaner comes with a unique steering function that allows you to easily manoeuvre the machine. Particularly beneficial for cleaning in awkward or confined spaces.Twist the cleaner in the direction you wish to turn.

To clean with accessories, release the handle from the main body of the cleaner by pressing the handle release button on the front of the cleaner and pull upwards.

Fit accessories to the handle as desired, as per the illustrations.

The following accessories are available with the product:Telescopic Crevice ToolDusting Brush Pet Hair Remover Turbo BrushAllergen Remover Turbo Brush* (certain models only)All accessories can fit directly onto the handle of the product or onto the telescopic crevice tool. Combine accessories depending on use.

For more efficient storage, remove the handle from the main body by pressing the handle release button on the front of the product and pull upwards.Park it on the side of the cleaner as shown in the image below.

It is dangerous to place the cleaner above you when cleaning stairs. Place the cleaner against the bottom step.ALWAYS work with the cleaner below you. IMPORTANT! Extra care must be taken when using the hose on the stairs. If the hose becomes blocked it can exert a strong pull in the direction of the cleaner.

1. Place the bin on a flat surface and release the clips from either side of the dust container. (illustration 1) 2. Lift the bin upper section containing the separation unit from the lower section.3. Use a cloth or the dusting brush to remove excessive dust from the separation units surface. (illustration 2) 4. Reassemble the bin upper section. Push clips back to fully close the bin then refit the dustbin to the cleaner.

1

2

The suction regulator on the cleaner soleplate is factory preset to “LOW”.To obtain the best cleaning performance from your cleaner:Turn over your cleaner and rotate the suction regulator to the ”HIGH” position using a coin.To reduce the force to push your cleaner, rotate the suction regulator to either the “MEDIUM” or “LOW” position depending on your preference.

Press the bin release buttons and remove the dustbin from the cleaner.

Hold the container using the carry handle over your bin and press the dust box empty button.The dust container door will automatically open.

Once emptied, gently tap or shake the container to release any excess dust.

Press the bin release buttons and remove the dust bin from the cleaner.Remove the turbo tool from the top cover of the cleaner.

Place the bin on a flat surface and press the filter access button to open the top cover of the bin.

Remove the BLUE filter pack (containing the HEPA and foam filter).

Separate the GREY foam filter from the BLUE HEPA filter pack using the tab provided.Gently tap both filters against the side of a bin to release excess dust.

Wash the GREY foam filter thoroughly under hand warm water until the water runs clean. Remove excess water by shaking and leave to dry for 24 hours. DO NOT USE HOT WATER OR DETERGENTS.

Wash the BLUE HEPA filter thoroughly from the inside under hand warm water until the water runs clean. Remove excess water by shaking and leave to dry for 24 hours. When completely dry reassemble and refit filters to cleaner.DO NOT USE HOT WATER OR DETERGENTS.

IMPORTANT! For optimum performance, shake off excess dust from the filters regularly. We recommend that the GREY foam filter and the BLUE hepa filter are washed every 3 Months

Lift the tab on the exhaust filter cover grille and remove from the cleaner.(1)&(2).Wash the exhaust filter under hand warm water until the water runs clean. Remove excess water by shaking and leave to dry for 24 hours.Refit filter only when completely dry.DO NOT USE HOT WATER OR DETERGENTS. (3)

1

2

3

Should the brushbar belt require changing please contact Hoover Customer Helpline. Hoover Customer Helpline Tel: 08705 400 600Fax: 01204 556149Email: customer.service@hoovercandy.com

If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first please make sure you have:• Emptied the dust container• Cleaned the filters• Checked for blockages 1. Firstly ensure that the brushbar pedal is in the ‘ON’ position. (Pressed down)

Remove the seven brushbar cover screws and remove the plastic cover.

Remove the brushbar from the housing and replace if required. contact Hoover for all genuine spare parts.

Refit the brushbar cover.

IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply before dismantling cleaner.

If cleaning tools were in use check the cleaning tool and the removable handle.

Check the hose by removing it from the handle, stretching it to full length.

Turn the cleaner over and rotate the brushes until they are free to rotate. If debris can be seen under the inspection cover, remove the two screws indicated.

Check for a blockage in the lower hose socket. To remove the hose pull the finger tab and pull the hose upwards. Use a flexible rod to remove any obstruction.

Open the pet hair or allergen remover by unlocking the clip. Lift the cover and remove the blockage.

Remove the dust container, the rating plate sticker found on the casing behind the dust box will have the details required. The information usually required by our customer service team are the model number which is 8 digits long (beginning with a 3), and the serial number which is 16 digits long.

Ensure that all of the hoses are connected correctly, also check that the collection bin is fitted correctly.

Ensure that the bin is not over full, this could create a restriction in the air flow, which in turn will make the motor pull the airflow quicker around the Vacuum, which will create more noise. For instruction on how to empty the bin select: Emptying the dust bin.

Unplug the appliance, check around the brush roll area to see if any carpet fibre or any other objects have become tangled up, this would cause alot of noise. For instructions on how to gain access to the brush roll, select: Changing the agitator.

Ensure that you clean the Pre motor and Exaust filter on a regular basis, not performing this operation will result in the appliance loosing performanace. For instruction on how to clean the filters select: Cleaning the Pre motor filter or Cleaning the exaust filter.

If you have cleaned the AirVolution dust bin, you have to refit the dust bin components in a specific way, as the top and bottom of the bin will only fit one way round due to the unique clips on either side of the bin. If these components have been fitted incorrectly, this will cause the appliance to leak duct and effect the performance of the appliance. For instruction on how to clean the bin select: Dust bin maintenance.

If any of the hoses are incorrectly fitted this could cause dust to leak from the appliance. Ensure all fitted correctly as per the "Preparing your cleaner" section

For information on how to check the agitaor for a blockage or to change the agitator, select: Changing the agitator.